Author [expand]	[Modern View]
Cooter 11-24-2004 06:32:45 209.240.205.63 11763 Report to Moderator	I want to install a 92 Lincoln 5.0 fuel injected engine and transmission in a 1956 F-100. I know I will have to use the computer and engine wiring harness for the 5.0. Where I'm lost at is what to hook up to the computer on the inside from the dash wiring harness? Anyone have any info on this swap? [Reply]  [No Email]
Cooter 11-26-2004 05:58:55 209.240.205.63 11787 Report to Moderator	Re: Need Info Please in reply to Cooter, 11-24-2004 06:32:45   Thanks guys for the info. Very helpful.   [Reply]  [No Email]
Redmud 11-25-2004 08:34:08 216.167.146.181 11776 Report to Moderator	Re: Need Info Please in reply to Cooter, 11-24-2004 06:32:45   Do a search for, "Painless Performance Products" They are in Ft.worth Texas. they make harness for just about any kind of engine swap. they also have tech guys to help you with your questions. If I remember right,you can talk to the tech guys on your computer. Redmud:   [Reply]  [No Email]
db 11-24-2004 16:43:13 205.188.116.199 11767 Report to Moderator	Re: Need Info Please in reply to Cooter, 11-24-2004 06:32:45   Something useful might be electrical wiring diagrams for each vehicle. You could find them on Ebay. There may be a lot of plugs you simply won't use under the dash, or you may need to switch ends to plug into any accessories you have and plan to run with them. Or you might want to switch some of the accessories from the newer one to the older one, like the radio. What about splicing the newer dash board onto the older dash board?   [Reply]  [No Email]
AllanC 11-24-2004 21:11:27 142.165.91.143 11770 Report to Moderator	Re: Re: Need Info Please in reply to db, 11-24-2004 16:43:13   We put a 5.0 from a Grand Marquis in a 78 pickup. If you get the entire engine compartment harness and all the attached junk with it, you will find that there are only 2 black plugs that go to the rest of the car. These are things like power, gauge readouts, Vss, fuel pump wires and cruise control. Get a diagram for the donor car at least. some parts houses have them on computer and can print them off for you. The wiring on a '56 isn't very elaborate. If you didn't have the harness and relays and all that from the Lincoln it would be a major job.   [Reply]  [No Email]
Henry-J 11-27-2004 16:19:57 207.144.17.42 11791 Report to Moderator	Re: Re: Re: Need Info Please in reply to AllanC, 11-24-2004 21:11:27   Wireing Diagrams for anything you can get for Bentley Pub. 1-800-423-3495 or go to your public libaray and look in the auto-manuals,for Mitchels Auto Repair books,I found the phone for them(and can't find it now)and they will help you out,,I think you can even get this information and much more on CD for a charge. Good luck   [Reply]  [No Email]